全國統一熱線：13821517568
SolarTurbines消防控制器 QS1034749中國辦事處
的 TurboFab 可幫助您為您的陸地和海上重要項目生產模塊化的壓縮或發電設備。
Solar 的單提式模塊 (SLM) 為您的作業現場提供即插即用的壓縮、發電或泵送解決方案。 SLM 的重量范圍為 300 - 2500 噸，并從我們位于德克薩斯州錢納爾維尤的 TurboFab 工廠發往世界各地。
每個 SLM 都按照我們或您的技術參數制造，它們可提供以下顯著優勢：
優化的進度和成本控制
所有必需系統的*整合，大大減少安裝時間
在我們自己的 ISO 9001 制造廠制造，符合 Solar 的質量控制和*安全愿景要求
通常交付期限為 12 個月
允許我們客戶接觸，進行規劃、設計和質量檢查以及預調試
設計可復制促進標準化
小的占用面積
有利于轉移
有利于運回 Solar 進行翻新/系統再設計
The Veteran’s Affairs San Diego Healthcare System (VASDHS) provides health care to more than 240,000 veterans in San
Diego and Imperial Valley counties. The San Diego VA Hospital has 304 hospital beds; 510,000 annual outpatient visits;
54,000 enrolled patients;7000 admissions; and 2000 full-time employees. VASDHS is affiliated with the University of
California, San Diego School of Medicine. The site covered by the project includes the VA Hospital complex which consists
of the Main Hospital Building, the Spinal Cord Injury Building, and the Central Heating and Cooling Plant. The Joint
Commission has recognized VASDHS as a 2013 Top Performer on key quality measures.
Reasons for CHP
The San Diego VA Hospital chose to develop a CHP system for its facilities for four main reasons: energy reliability; energy
efficiency; pollution reduction; and cost savings. This strategic decision was instrumental in ensuring that, unlike other San
Diego County facilities that experienced total loss of all electric power in September 2011 during a county wide power
outage, the San Diego VA Hospital was able to maintain power for all outlets, clinical diagnostic equipment, and air
conditioning and ventilation in its facilities during the outage. The installed CHP system is also equipped with a
recuperator, which provides more energy to electrical power generation and less to heating, which matches the Medical
Center Campus load profile extremely well. The CHP systems replace
This site uses cookies to create a better experience for you. Some of these cookies are set automatically because they’re necessary for the site to perform. Other cookies are used for functional, performance, and targeting purposes to enhance your experience by personalizing content and ads, enabling third party content and features, and enabling us to analyze how this site is used. To learn more, please visit our Legal Notices - Cookie Page.
By clicking 'I Accept', you are agreeing to our use of functional, performance and targeting cookies.
Explore our Gas Compressors
Solar Turbines has delivered over 6500 compressors around the world for a variety of applications with best in class efficiencies. See our entire line of gas compressors here.
Actual conditions can vary dramatically based on location and application factors. The Required Power is based on inputs and is estimated for information only and does not constitute Solar's agreement to offer a firm proposal in the future.
Available Power is based on the selected engine output power and is for a new engine at nominal performance, optimum speed and ISO conditions. Final turbine selection will be affected by your actual site conditions.
Compressor selection is provided for guidance only, it does not include details engineering the selection, which involves, critical speeds bearing spans, compressor loadings, allowable compressor configurations, materials of construction, bearings requirements, torque, etc.
Required power is calculated using nominal compressor efficiency and ISO conditions.
Contact Solar Turbines for details on your specific project or application.
Electric Motor Drive (EMD) solutions are also available. Contact Solar Turbines if a gas turbine product does not align with your project needs.
下一篇：哈威電磁閥結構特點
在線客服